General HPLC Accessories
Pickering Laboratories Inc Onyx, Single Pump, Knitted 1.4mL, 240V (Mycotoxins, Aflatoxins, Fumonisins, Sulfonamide Drugs)
Onyx, Single Pump, Knitted 1.4mL, 240V (Mycotoxins, Aflatoxins, Fumonisins, Sulfonamide Drugs)
Waters Corp WATERS CORPORATION Fuse Kit
This Fuse Kit is a service part specifically designed for instrument maintenance. It provides essential components for the upkeep and repair of laboratory instruments.
- Designed for instrument maintenance.
- Categorized as a service part.
- Essential for instrument upkeep and repair.
Waters Corporation Method Validation Kit, PFP, 2.5 μm, 100 Å, 3 x 150 mm
This method validation kit includes three columns, each packed with a different sorbent batch. These columns feature a low coverage, unendcapped pentafluorophenyl phase, offering exceptional separation of closely related compounds and alternative selectivity. Packed in ultra-low dispersion hardware, the 2.5 μm eXtended Performance (XP) columns deliver excellent separation performance, robustness, and throughput for HPLC assays, supporting UPLC adoption.
- Consists of three columns packed with three different batches of sorbent.
- Features a low coverage, unendcapped pentafluorophenyl phase.
- Provides exceptional separation of closely related compounds.
- Packed in ultra-low dispersion hardware.
- 2.5 μm eXtended Performance (XP) columns enable exceptional separation, robustness, and throughput for HPLC assays, supporting UPLC adoption.
Waters Corp CORTECS Phenyl Method Validation Kit, 90à , 2.7 µm, 3 mm X 75 mm, 3/pk
CORTECS Phenyl Method Validation Kit, 90à , 2.7 µm, 3 mm X 75 mm, 3/pk
Pickering Laboratories Inc Onyx PCX Tubing Kit - Dual Pump System
Onyx PCX Tubing Kit - Dual Pump System
Waters Corp CORTECS C18+ Method Validation Kit, 90à , 1.6 µm, 3 mm X 100 mm, 3/pk
CORTECS C18+ Method Validation Kit, 90à , 1.6 µm, 3 mm X 100 mm, 3/pk
Waters Corp Tubing Assembly, Seal Wash to Accumulator, EFTE
Tubing Assembly, Seal Wash to Accumulator, EFTE
Waters Corp Waters Solvent Inlet Filter, 10μm, 1/16 in. OD
Waters Solvent Inlet Filter, 10μm, 1/16 in. OD
Waters Corp CORTECS T3 Method Validation Kit, 120à , 2.7 µm, 2.1 mm X 50 mm, 3/pk
CORTECS T3 Method Validation Kit, 120à , 2.7 µm, 2.1 mm X 50 mm, 3/pk
Waters Corp XBridge BEH HILIC Method Validation Kit, 130Å, 2.5 µm, 3 mm X 150 mm, 3/pk
This method validation kit consists of three XBridge BEH HILIC columns packed with three different batches of sorbent. XBridge BEH HILIC columns contain unbonded BEH substrate and are designed to retain and separate very polar compounds. These unique columns are optimized and tested to produce efficient, reproducible separations under HPLC HILIC conditions. More rugged than silica based HILIC phases, the BEH particle’s chemical stability results in long column lifetimes. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.
Waters Corporation XBridge BEH HILIC Method Validation Kit, 130Å, 2.5 μm, 2.1 mm X 150 mm
Waters Corporation XBridge BEH HILIC Method Validation Kit, 130Å, 2.5 μm, 2.1 mm X 150 mm
Medchemexpress LLC AAA-10 | 2758171-70-7 | 98.0% | C₂₅H₄₁FO₅S | 100 MG
AAA-10 is an orally active inhibitor of gut bacterial bile salt hydrolases (BSH). It targets *B. theta* rBSH with an IC₅₀ of 10 nM and *B. longum* rBSH with an IC₅₀ of 80 nM. This product is for research use only and is not sold to patients.
- Inhibits BSH activity in bacterial cultures (IC₅₀s of 74 nM for Gram-negative and 901 nM for Gram-positive bacteria)
- Significantly inhibits deconjugation of glycochenodeoxycholic acid-d4 or taurocholic acid-d4 substrates in human feces
- Reduces levels of deoxycholic acid (DCA) and lithocholic acid (LCA) in mouse feces
- Exhibits high colonic exposure and low gut permeability
Optimize Technologies EXP2 Nano Trap In-Line Holder Kit with 10-32 Threads (Includes 1/32" PEEKsil tubing and 4 EXP2 Fittings)
The EXP™2 Nano Trap System provides the finest low-volume hardware and connections to minimize extra column effects and sample dispersion. The packed beds are extremely versatile: robust for applications calling for trapping in one direction followed by elution in the reverse while adding the absolute lowest swept volume for vented-trap applications where the trap is loaded and eluted in the same direction. EXP™2 Nano Trap Holders are available with 10-32 threaded connections for 1/16” tube ports or 6-40 threaded connections for 1/32” tube ports. Multiple bed volumes and bonded phases are available. EXP™2 fittings allow the Nano Trap to achieve the highest performance at UHPLC pressures while maintaining a small profile to fit tight spaces. Couple with narrow bore (25um, 50um, 100um) PEEKsil tubing to deliver top performance. Additionally, the product features a low swept volume design for peak sharpness and is rated to 20,000+psi.